General
Manufacturer	IP-COM
Model	IP-COM F1109P-8-102W
Manufacturer Part No	F1109P-8-102W

IP-COM F1109P-8-102W 9-Port Fast Unmanaged Switch With 8-Port PoE

Brand: IP-COM
Model: IP-COM F1109P-8-102W
Availability: Out Of Stock
Part No: F1109P-8-102W
chat with Terrabyt.com Bulk Requirement

Compliant with IEEE802.3, IEEE802.3u, IEEE802.3X, IEEE802.3af/at standards

9*10/100Mbps Base-T RJ45 port; Ports 1-8: IEEE 802.3af/at PoE ports

2K MAC address and MAC address learning

IEEE 802.3x full duplex flow control, and backpressure half duplex flow control

1.8 Gbps switching fabric for non-blocking line-speed forwarding

maximum power output of each PoE port: 30 W; maximum power output of the switch: 102W.

1Mb packet buffer, twice of that counterparts

Supports port VLAN; ports 1 to 8 can communicate with the uplink port (port 9) but cannot communicate with each other

Desktop installation & wall-mount

F1109P-8-102W is a IP-COM switch that offers 9 10/100M RJ45 ports. Ports 1-8 comply with the IEEE802.3af standard (maximum PoE power output :15.4w) and 802.3at standard (maximum PoE poweroutput: 30W). The switch offers a maximum PoE poweroutput of 92W and can supply power to exchange data with APs, IP cameras, and IP phones through CAT5e cables. It also provides simple management modes such as Standard, VLAN. Thus, F1109P-8-102W is a perfect choice for SMBs, hotels, and office to have small-scale HD surveillance and wireless networking.

2 reviews / Write a review

IP-COM F1109P-8-102W 9-Port Fast Unmanaged Switch With 8-Port PoE

Product Information
Interface	8 10/100M Base-T ports(Data/Power), 1 10/100M Base-T ports(Data)
Port Lightning Protection	6KV
Store and forward	Yes
Exchange Capacity	1.8 Gbps
Packet forwarding rate	1.34Mpps
MAC Address Table	2K
PoE supply management	Port 1-8 support IEEE802.3at/af PoE standard
PoE through pin	1 2 4 5 +;3 6 7 8 -
Voltage input range	AC: 100-240V～50/60Hz DC: 51V 2A
Dimensions	177.510426mm( W x D x H )
Power Consumption	In full configuration: 102W PoE Max Power Supply: 92W
Port Features	Standard:the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN:ports 1 to 8 are isolated from each other,but can communicate with ports 9 (uplink port) respectively.