General
Manufacturer	UBIQUITI
Model	Ubiquiti UA-G2
Manufacturer Part No	UA-G2
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	California

Ubiquiti UA-G2 G2 Reader Price

Brand: UBIQUITI
Model: Ubiquiti UA-G2
Availability: Out Of Stock
Part No: UA-G2
chat with Terrabyt.com Bulk Requirement

Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking.

#1: Unlock using an NFC card or UniFi Identity mobile app

#2: Additional handwave unlock functionality

#3: Entry and exit greeting messages

#4: Connects to UniFi Access Hub using PoE

#5: IP55 weather resistance (-30 to 45 C)

21 reviews / Write a review

Buy Ubiquiti UA-G2 G2 Reader - UBIQUITI - UBIQUITI

Mechanical

Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")

Enclosure material Polycarbonate, glass

Mounting In wall, gang box

Weatherproofing IP55

Hardware

Networking interface (1) 10/100 MbE RJ45 port

Connectivity BLE 4.1

Power method PoE

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Supported voltage range 48V DC

Max. power consumption 5W

ESD/EMP protection Air: +15kV, contact: +8kV

Sensors Proximity sensor

Speaker (1) 8 ohm, 0.7W

LEDs Steady white: Pending adoption

Steady blue: Adopted

Alternating white/blue: Firmware updating

Strobing red: Emergency lockdown

Steady green: Emergency evacuation

(2) Rapid flashing blue: NFC credential authenticated

(2) Rapid flashing red: NFC credential authentication failed

Breathing blue: Ready to register NFC cards

Button (1) Factory-reset

NFC frequency 13.56 MHz

NFC read range < 30 mm

NFC standards ISO 14443A, 14443B, 15693

NFC technology NFC Tag 1,2,3,4,5

MIFARE Classic

MIFAREPlus

MIFARE Ultralight

MIFARE DESFire

Operating environment Outdoor use

Ambient operating temperature -30 to 45 C (-22 to 113 F)

Ambient operating humidity 5 to 90% noncondensing

Software information The software version of a product can be checked at https://unifi.ui.com

UL 294 level Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.

CAN/ULC-60839-11-1 Grade Grade assignment: I

Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02

Software

Management application UniFi Access: Version 1.5.9 and later

General
Manufacturer	UBIQUITI
Model	Ubiquiti UA-G2
Manufacturer Part No	UA-G2
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	California